1996 Mercury Villager
Vehicle Specs & Maintenance Data
The 1996 Mercury Villager maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mercury Villager.
For oil changes, the 1996 Mercury Villager takes 5W-20 Full Synthetic motor oil with a capacity of 5.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mercury Villager, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 1996 Mercury Villager. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 1996 Mercury Villager uses 5W-20 Full Synthetic motor oil (5.5 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 1996 Mercury Villager.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 1996 Mercury Villager. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.
FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
DEALERS WILL REPLACE THE VENT HOSE.
VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
VEHICLE DESCRIPTION: MINI VANS. THESE VEHICLES WERE PRODUCED WITH POWER WINDOWS THAT CAN BE CLOSED AFTER THE IGNITION KEY IS TURNED TO THE "OFF" POSITION AND THE RIGHT FRONT (PASSENGER) DOOR IS OPENED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS 118, "POWER-OPERATED WINDOW SYSTEMS."
THERE IS THE POTENTIAL FOR UNSUPERVISED CHILDREN TO OPERATE THE POWER WINDOWS, INCREASING THE RISK OF PERSONAL INJURY TO THE CHILD.
OWNERS WILL BE PROVIDED WITH A LABEL REMINDING OWNERS NOT TO LEAVE CHILDREN UNATTENDED BECAUSE THE POWER WINDOWS CAN OPERATE FOR 15 MINUTES AFTER THE VEHICLE IGNITION HAS BEEN TURNED OFF UNLESS THE DRIVER'S DOOR IS OPENED. ALSO INCLUDED ARE INSTRUCTIONS DESCRIBING HOW AND WHERE THIS LABEL IS TO BE INSTALLED. IF AN OWNER PREFERS, THEIR DEALER CAN INSTALL THIS LABEL FOR THEM.