1998 Mercury Villager

Vehicle Specs & Maintenance Data

Engine
3L V6 Turbo
Oil Type & Capacity
5W-20 Full Synthetic (5.5 qts)
Transmission
Automatic 4-spd
Wheel Torque
80
ft-lbs

The 1998 Mercury Villager maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mercury Villager.

For oil changes, the 1998 Mercury Villager takes 5W-20 Full Synthetic motor oil with a capacity of 5.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Mercury Villager, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There are 2 NHTSA safety recalls on file for the 1998 Mercury Villager. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 1998 Mercury Villager uses 5W-20 Full Synthetic motor oil (5.5 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 3 brake fluid.

1998 Mercury Villager Specifications
Motor Oil5W-20 Full Synthetic
Oil Capacity5.5 qt
Lug Nut Torque80 ft-lbs
Brake FluidDOT 3
CoolantMotorcraft Gold (OAT)
Transmission FluidMercon LV
Transmission Fluid
Fluid Type
Mercon LV
Shop
Coolant
Fluid Type
Motorcraft Gold (OAT)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 1998 Mercury Villager.

No known problems reported for this vehicle yet.

2 NHTSA safety recalls for the 1998 Mercury Villager. Check your VIN at NHTSA.gov

1

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Campaign: 00V419002 Date: 02/01/2001

VEHICLE DESCRIPTION: MINIVANS. THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING. CRACKS HAVE DEVELOPED IN THE VENT HOSE. IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.

Consequence

FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.

Remedy

DEALERS WILL REPLACE THE VENT HOSE.

2

ELECTRICAL SYSTEM:12V/24V/48V BATTERY

Campaign: 97V184001 Date: 29/10/1997

VEHICLE DESCRIPTION: PASSENGER MINI VANS EQUIPPED WITH AUTOMOTIVE BATTERIES SUPPLIED BY GNB TECHNOLOGIES. THESE BATTERIES HAVE A DEFECTIVE NEGATIVE POST THAT CAN CAUSE ACID LEAKAGE AND RELATED CORROSION DAMAGE.

Consequence

THIS CONDITION CAN CAUSE A CATASTROPHIC FAILURE OF THE BATTERY WHICH COULD LEAD TO AN ENGINE FIRE OR BATTERY EXPLOSION.

Remedy

DEALERS WILL REPLACE THESE BATTERIES. UNTIL A NEW BATTERY IS OBTAINED, OWNERS SHOULD NOT ATTEMPT TO "JUMP START" THESE BATTERIES.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Villager — Other Model Years
2002200120001999199719961995
See Also
1998 Mercury Villager Lug Nut TorqueBest Oil for 1998 Mercury VillagerAll Vehicles Using 5W-20 Full Synthetic OilAll Vehicles Using DOT 3Oil Change Guide: 1998 Mercury VillagerWiper Replacement: 1998 Mercury Villager