1998 Land Rover Range Rover
Vehicle Specs & Maintenance Data
The 1998 Land Rover Range Rover maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Land Rover Range Rover.
For oil changes, the 1998 Land Rover Range Rover takes 5W-30 Full Synthetic motor oil with a capacity of 8 quarts. Brake fluid type is DOT 4, the recommended coolant is OAT Coolant (Orange), and transmission fluid is ZF Lifeguard 8 (ATF). Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Land Rover Range Rover, torque the lug nuts to 84 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 1998 Land Rover Range Rover. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 1998 Land Rover Range Rover uses 5W-30 Full Synthetic motor oil (8 qt capacity), requires lug nuts torqued to 84 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 1998 Land Rover Range Rover.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 1998 Land Rover Range Rover. Check your VIN at NHTSA.gov
ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. COOLANT SYSTEM LEAKS HAVE BEEN IDENTIFIED IN AREAS WHERE THE COOLANT COULD BE SUBJECTED TO ELEVATED TEMPERATURES.
CONSEQUENTLY, THE FLUID COULD IGNITE CAUSING AN UNDER-HOOD FIRE.
DEALERS WILL MAKE A SERIES OF MODIFICATIONS TO SEVERAL UNDERHOOD HOSE COMPONENTS TO ELIMINATE THE RELEASE OF ENGINE COOLANT.
ENGINE AND ENGINE COOLING
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. AS A RESULT OF WATER INGRESS AND SUBSEQUENT ICE BLOCKAGE, THE TRANSMISSION BREATHER TUBE CAN BECOME CLOGGED, EXPELLING TRANSMISSION FLUID FROM THE DIPSTICK TUBE ONTO HOT ENGINE COMPONENTS.
THIS LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, CAN RESULT IN AN UNDERHOOD FIRE.
DEALERS WILL REMOVE THE TRANSMISSION BREATHER TUBE FROM THE INNER FENDER AND A SECTION OF THE HOSE WILL BE CUT AT AN ANGLE. THIS ACTION WILL REMOVE THE END OF THE BREATHER TUBE FROM ANY POOLED WATER AND WILL ELIMINATE WATER DROPLETS FROM CLINGING TO THE END OF THE TUBE.
ENGINE AND ENGINE COOLING
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. CERTAIN UNDERHOOD HOSE AND TUBING COMPONENTS CAN FAIL ALLOWING FLUID TO LEAK, SUCH AS ENGINE COOLANT, WINDSHIELD WIPER FLUID, AND AUTOMATIC TRANSMISSION FLUID.
THIS LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, CAN RESULT IN AN UNDERHOOD FIRE.
DEALERS WILL INSPECT THESE VEHICLES AND REPLACE THESE COMPONENTS. NOTE THAT NOT ALL COMPONENTS WILL NEED TO BE REPLACED.