2000 Honda Passport
Vehicle Specs & Maintenance Data
The 2000 Honda Passport maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Honda Passport.
For oil changes, the 2000 Honda Passport takes 5W-30 Full Synthetic motor oil with a capacity of 4.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Type 2 Coolant (OAT), and transmission fluid is ATF DW-1. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Honda Passport, torque the lug nuts to 65 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There is 1 NHTSA safety recall on file for the 2000 Honda Passport. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2000 Honda Passport uses 5W-30 Full Synthetic motor oil (4.5 qt capacity), requires lug nuts torqued to 65 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2000 Honda Passport.
No known problems reported for this vehicle yet.
1 NHTSA safety recall for the 2000 Honda Passport. Check your VIN at NHTSA.gov
SUSPENSION:REAR
ISUZU IS RECALLING CERTAIN MODEL YEAR 1998-2002 ISUZU RODEO AND MODEL YEAR 2002 ISUZU AXIOM VEHICLES, AND HONDA IS RECALLING CERTAIN 1998-2002 HONDA PASSPORT VEHICLES, THAT WERE ORIGINALLY SOLD, OR ARE CURRENTLY REGISTERED, IN THE STATES OF MAINE, NEW HAMPSHIRE, VERMONT, MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW YORK, NEW JERSEY, PENNSYLVANIA, DELAWARE, MARYLAND, THE DISTRICT OF COLUMBIA, WEST VIRGINIA, OHIO, INDIANA, MICHIGAN, ILLINOIS, WISCONSIN, MINNESOTA, IOWA, MISSOURI, AND KENTUCKY. VEHICLES THAT HAVE EXPERIENCED SUSTAINED EXPOSURE TO HIGHLY CORROSIVE MATERIALS USED IN SOME JURISDICTIONS FOR ROAD DEICING PURPOSES MAY EXPERIENCE EXCESSIVE CORROSION IN THE VICINITY OF THE FORWARD MOUNTING POINT BRACKET FOR THE LEFT OR RIGHT REAR SUSPENSION LOWER LINK PRIOR TO THE TIME THAT SUCH CORROSION WOULD NORMALLY BE EXPECTED.
EXCESSIVE CORROSION MAY RESULT IN THE LEFT OR RIGHT REAR SUSPENSION LOWER LINK BRACKET BECOMING DETACHED FROM THE FRAME, WHICH CAN AFFECT VEHICLE HANDLING AND POTENTIALLY CAUSE A CRASH.
DEALERS WILL INSPECT THE REAR SUSPENSION LOWER LINK BRACKET AREA. FOR VEHICLES IN WHICH LITTLE OR NO CORROSION IS FOUND, THE AREA WILL BE TREATED WITH AN ANTI-CORROSIVE COMPOUND. FOR VEHICLES IN WHICH CORROSION HAS DAMAGED THE REAR SUSPENSION LOWER LINK BRACKET AND AFFECTED ITS CONNECTION TO THE VEHICLE FRAME, A REINFORCEMENT BRACKET WILL BE INSTALLED. IN THE RARE EVENT THE CORROSION IS SO SEVERE THAT THE REINFORCEMENT BRACKET REMEDY WOULD NOT BE APPROPRIATE, A REPURCHASE OFFER WILL BE EXTENDED TO THE VEHICLE'S OWNER. ALL INSPECTIONS AND REMEDIES WILL BE PROVIDED FREE OF CHARGE FOR VEHICLES THAT ARE 10 YEARS OLD OR LESS. FOR VEHICLES OLDER THAN 10 YEARS, ISUZU WILL OFFER A FREE REMEDY, BUT ONLY IF THE VEHICLE IS PRESENTED TO AN ISUZU SERVICE FACILITY, OR HONDA DEALER (AS APPLICABLE), DEALER WITHIN 12 MONTHS OF WHEN OWNER NOTIFICATIONS WERE ISSUED. THE SAFETY RECALL BEGAN ON DECEMBER 10, 2010. ISUZU OWNERS MAY CONTACT ISUZU AT 1-800-255-6727. HONDA OWNERS MAY CONTACT HONDA AT 1-800-999-1009.