2002 Saturn Vue
Vehicle Specs & Maintenance Data
The 2002 Saturn Vue maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Saturn Vue.
For oil changes, the 2002 Saturn Vue takes 5W-30 motor oil with a capacity of 5.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Saturn Vue, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2002 Saturn Vue. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2002 Saturn Vue uses 5W-30 motor oil (5.5 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2002 Saturn Vue.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2002 Saturn Vue. Check your VIN at NHTSA.gov
ELECTRICAL SYSTEM:IGNITION
General Motors LLC (GM) is recalling certain model year 2002-2004 Saturn Vue vehicles manufactured September 11, 2001, to April 6, 2004. In the affected vehicles, it may be possible for the key to be removed from the ignition when the ignition is not in the "Off" position.
If the key can be removed from the ignition when the ignition is not in the "off" position, the vehicle could roll away: (a) for an automatic transmission, if the transmission is not in the "Park" position; or (b) for a manual transmission, if the parking brake is not engaged and the transmission is not in the "Reverse" position. This potential for rollaway increases the risk for a crash and occupant or pedestrian injuries.
GM will notify owners, and dealers will inspect the vehicle to see if the key can be pulled out when the ignition is off. If it can, dealers will replace the ignition cylinder and keys, free of charge. The recall began in October 2014. Owners may contact Saturn customer service at 1-800-553-6000. GM's number for this recall is 14506. Note: Until a vehicle has been remedied, owners and operators are advised that when exiting, to be sure that the vehicle is in "Park," or in the case of a manual transmission, that the vehicle is in the "Reverse" position and the parking brake is engaged.
SEAT BELTS:FRONT:ANCHORAGE
VEHICLE DESCRIPTION: CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME VEHICLES WERE PRODUCED WITH REAR OUTER SEAT BELT SHOULDER GUIDE ANCHOR BOLTS THAT WERE INCORRECTLY INSTALLED.
IF THESE BOLTS WERE INCORRECTLY INSTALLED, THEY WOULD NOT WITHSTAND THE LOAD REQUIREMENTS OF THE STANDARD. IF AN ANCHORAGE FAILED IN A CRASH, THE OCCUPANT WOULD NOT BE PROPERLY RESTRAINED AND COULD HAVE AN INCREASED RISK OF INJURY.
DEALERS WILL REPLACE THE REAR SHOULDER GUIDE ANCHOR BOLTS. OWNER NOTIFICATION BEGAN DECEMBER 19, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SATURN AT 1-800-553-6000.