2004 Isuzu Ascender

Vehicle Specs & Maintenance Data

Engine Size
Engine
5.3L V8
Oil Type & Capacity
5W-30 (6 qts)
Transmission
Automatic 4-spd
Wheel Torque
100
ft-lbs

The 2004 Isuzu Ascender maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Isuzu Ascender.

For oil changes, the 2004 Isuzu Ascender takes 5W-30 motor oil with a capacity of 6 quarts. Brake fluid type is DOT 3, the recommended coolant is Long Life Coolant (Green), and transmission fluid is Dexron III. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Isuzu Ascender, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There is 1 NHTSA safety recall on file for the 2004 Isuzu Ascender. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2004 Isuzu Ascender uses 5W-30 motor oil (6 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.

2004 Isuzu Ascender Specifications
Motor Oil5W-30
Oil Capacity6 qt
Lug Nut Torque100 ft-lbs
Brake FluidDOT 3
CoolantLong Life Coolant (Green)
Transmission FluidDexron III
Transmission Fluid
Fluid Type
Dexron III
Shop
Coolant
Fluid Type
Long Life Coolant (Green)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2004 Isuzu Ascender.

No known problems reported for this vehicle yet.

1 NHTSA safety recall for the 2004 Isuzu Ascender. Check your VIN at NHTSA.gov

1

EXTERIOR LIGHTING:TURN SIGNAL

Campaign: 05V198000 Date: 05/05/2005

ON CERTAIN TRUCKS AND SPORT UTILITY VEHICLES, THE DRIVER WISHING TO SIGNAL A TURN BY MOVING THE DIRECTIONAL SIGNAL LEVER, (UP OR DOWN) MAY CAUSE THE FRONT MARKER/TURN LIGHTS AND REAR TURN LIGHTS TO FLASH IN A MANNER SIMILAR TO HAZARD WARNING, RATHER THAN FLASHING ON THE DESIRED SIDE ONLY.

Consequence

THE DRIVER MAY NOT BE ABLE TO CLEARLY SIGNAL THEIR INTENTIONS TO TURN, CHANGE TRAVEL LANES, OR POTENTIALLY WARN OTHERS OF AN IMPAIRED VEHICLE OPERATING CONDITION INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL REPLACE THE SUSPECT FLASHER MODULES WITH A NEW FLASHER MODULE DESIGNED WITH SEALED RELAYS AND MORE DURABLE CONTACT MATERIAL INSIDE OF THE RELAYS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2005. ISUZU BEGAN MAILING OWNER LETTERS ON AUGUST 4, 2005. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463, ISUZU AT 1-800-255-6727, BUICK AT 1-866-608-8080, AND OLDSMOBILE AT 1-800-630-6537.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Ascender — Other Model Years
20082007200620052003
See Also
2004 Isuzu Ascender Lug Nut TorqueBest Oil for 2004 Isuzu AscenderAll Vehicles Using 5W-30 OilAll Vehicles Using DOT 3Oil Change Guide: 2004 Isuzu AscenderWiper Replacement: 2004 Isuzu Ascender