2005 Isuzu Ascender

Vehicle Specs & Maintenance Data

Engine Size
Engine
5.3L V8
Oil Type & Capacity
5W-30 (6 qts)
Transmission
Automatic 4-spd
Wheel Torque
100
ft-lbs

The 2005 Isuzu Ascender maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Isuzu Ascender.

For oil changes, the 2005 Isuzu Ascender takes 5W-30 motor oil with a capacity of 6 quarts. Brake fluid type is DOT 3, the recommended coolant is Long Life Coolant (Green), and transmission fluid is Dexron III. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Isuzu Ascender, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There is 1 NHTSA safety recall on file for the 2005 Isuzu Ascender. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2005 Isuzu Ascender uses 5W-30 motor oil (6 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.

2005 Isuzu Ascender Specifications
Motor Oil5W-30
Oil Capacity6 qt
Lug Nut Torque100 ft-lbs
Brake FluidDOT 3
CoolantLong Life Coolant (Green)
Transmission FluidDexron III
Transmission Fluid
Fluid Type
Dexron III
Shop
Coolant
Fluid Type
Long Life Coolant (Green)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2005 Isuzu Ascender.

No known problems reported for this vehicle yet.

1 NHTSA safety recall for the 2005 Isuzu Ascender. Check your VIN at NHTSA.gov

1

VISIBILITY:WINDSHIELD

Campaign: 05V035000 Date: 03/02/2005

CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD URETHANE BEAD MAY NOT HAVE ADHERED TO THE BODY IN CERTAIN AREAS DURING THE CURE PROCESS.

Consequence

IF A CRASH OCCURS, THE WINDSHIELD MAY NOT BE RETAINED, INCREASING THE RISK OF INJURY TO A VEHICLE OCCUPANT.

Remedy

DEALERS WILL REPLACE THE WINDSHIELD FREE OF CHARGE. THE RECALL BEGAN ON MARCH 10, 2005. OWNERS MAY CONTACT BUICK AT 1-866-608-8080, CHEVROLET AT 1-800-630-2438, OR GMC AT 1-866-996-9463.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Ascender — Other Model Years
20082007200620042003
See Also
2005 Isuzu Ascender Lug Nut TorqueBest Oil for 2005 Isuzu AscenderAll Vehicles Using 5W-30 OilAll Vehicles Using DOT 3Oil Change Guide: 2005 Isuzu AscenderWiper Replacement: 2005 Isuzu Ascender