2005 Saab 9-7X

Vehicle Specs & Maintenance Data

Engine Size
Engine
4.2L V6
Oil Type & Capacity
5W-30 Full Synthetic (7 qts)
Transmission
Automatic 4-spd
Wheel Torque
100
ft-lbs

The 2005 Saab 9-7X maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Saab 9-7X.

For oil changes, the 2005 Saab 9-7X takes 5W-30 Full Synthetic motor oil with a capacity of 7 quarts. Brake fluid type is DOT 4, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Saab 9-7X, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There are 2 NHTSA safety recalls on file for the 2005 Saab 9-7X. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2005 Saab 9-7X uses 5W-30 Full Synthetic motor oil (7 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 4 brake fluid.

2005 Saab 9-7X Specifications
Motor Oil5W-30 Full Synthetic
Oil Capacity7 qt
Lug Nut Torque100 ft-lbs
Brake FluidDOT 4
CoolantDex-Cool (OAT)
Transmission FluidDexron VI
Transmission Fluid
Fluid Type
Dexron VI
Shop
Coolant
Fluid Type
Dex-Cool (OAT)
Shop
Brake Fluid
Fluid Type
DOT 4
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2005 Saab 9-7X.

No known problems reported for this vehicle yet.

2 NHTSA safety recalls for the 2005 Saab 9-7X. Check your VIN at NHTSA.gov

1

VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

Campaign: 14V404000 Date: 02/07/2014

General Motors LLC (GM) is recalling certain model year 2005-2007 SAAB 9-7x; 2006 Chevrolet Trailblazer EXT and GMC Envoy XL; and 2006-2007 Chevrolet Trailblazer, GMC Envoy, Buick Rainier and Isuzu Ascender vehicles. Fluid may enter the driver's door master power window switch module, causing corrosion that could result in a short in the circuit board. A short may cause the power door lock and power window switches to function intermittently or become inoperative. The short may also cause overheating, which could melt components of the door module, producing odor, smoke, or a fire.

Consequence

A short in the circuit board could lead to a fire, increasing the risk of personal injury. A fire could occur even while the vehicle is not in use. As a precaution, owners are advised to park outside until the remedy has been made.

Remedy

GM will notify owners, and dealers will inspect the part number on the door module, and install a new door module if necessary, free of charge. Parts for the remedy are not currently available. An interim letter was mailed to owners in August 2014. A second owner letter will be mailed when parts are available. Owners may contact GM customer service at 1-800-521-7300 (Buick), 1-800-222-1020 (Chevrolet), 1-800-462-8782 (GMC), 1-800-955-9007 (SAAB), and 1-800-255-6727 (Isuzu). GM's number for this recall is 14309. NOTE: This recall provides a new remedy for all vehicles covered by recall 13V-248. Vehicles whose modules were modified but not replaced as part of the previous recall remedy must have their vehicles remedied again under this campaign.

2

ELECTRICAL SYSTEM

Campaign: 13V248000 Date: 13/06/2013

General Motors (GM) is recalling certain model year 2005-2007 SAAB 9-7x; 2006 Chevrolet Trailblazer EXT and GMC Envoy XL; and 2006-2007 Chevrolet Trailblazer, GMC Envoy, Buick Rainier and Isuzu Ascender vehicles. Fluid may enter the driver's door module, causing corrosion that could result in a short in the circuit board. A short may cause the power door lock and power window switches to function intermittently or become inoperative. The short may also cause overheating, which could melt components of the door module, producing odor, smoke, or a fire.

Consequence

A short in the circuit board could lead to a fire, increasing the risk of personal injury. A fire could occur even while the vehicle is not in use. As a precaution, owners are advised to park outside until the remedy has been made.

Remedy

Owners will be contacted and dealers will test the driver's door module. If the module is functioning properly, a protective coating will be applied. If the module is not functioning properly, it will be replaced. These repairs will be done free of charge. GM will notify Buick, Chevrolet, and GMC owners, Isuzu and Saab will contact their respective owners. The recall began on August 2, 2013. Buick owners may contact the owner center at 1-800-521-7300, Chevrolet owners at 1-866-694-6546, GMC owners at 1-866-996-9463, Isuzu owners at 1-800-255-6727, and Saab owners at 1-800-955-9007. GM's campaign number is 12180. This recall is an expansion of recall 12V-406.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
9-7X — Other Model Years
2009200820072006
See Also
2005 Saab 9-7X Lug Nut TorqueBest Oil for 2005 Saab 9-7XAll Vehicles Using 5W-30 Full Synthetic OilAll Vehicles Using DOT 4Oil Change Guide: 2005 Saab 9-7XWiper Replacement: 2005 Saab 9-7X