2006 Ford F-250
Vehicle Specs & Maintenance Data
The 2006 Ford F-250 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Ford F-250.
For oil changes, the 2006 Ford F-250 takes 5W-30 Full Synthetic motor oil with a capacity of 7.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Ford F-250, torque the lug nuts to 150 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2006 Ford F-250. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2006 Ford F-250 uses 5W-30 Full Synthetic motor oil (7.5 qt capacity), requires lug nuts torqued to 150 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2006 Ford F-250.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2006 Ford F-250. Check your VIN at NHTSA.gov
TRAILER HITCHES
KNAPHEIDE IS RECALLING 108 MY 2006-2008 PRO SERIES TRUCK BEDS EQUIPPED WITH AN ICC BUMPER WHICH INCLUDED A PROVISION FOR A BALL HITCH. THERE MAY BE AN INSUFFICIENT WELD ATTACHING THE HITCH CHANNEL TO THE SUPPORTING STRUCTURE.
THIS COULD RESULT IN BENDING OF THE HITCH CHANNEL OR THE HITCH COULD BE PULLED OFF THE VEHICLE, INCREASING THE RISK OF A CRASH.
KNAPHEIDE WILL OFFER TWO REMEDIES TO ITS CUSTOMERS: (1) FOR THOSE CUSTOMERS WHO DO NOT USE THE HITCH, THE HITCH WILL BE REMOVED FROM THE TRUCK BED AND REPLACED WITH AN ICC BUMPER; OR (2) FOR THOSE CUSTOMERS WHO NEED A HITCH, A RECEIVER HITCH ASSEMBLY WILL BE ADDED TO THE EXISTING HITCH ASSEMBLY AND ALL SUSPECT WELD JOINTS WILL BE RE WELDED. THE RECALL BEGAN ON AUGUST 15, 2008. OWNERS MAY CONTACT KNAPHEIDE AT 1-877-473-5763.
SERVICE BRAKES, AIR
CERTAIN HARSCO WHEEL MODIFICATION GROUPS CONTAINING ACCURIDE STEEL RIMS, P/NOS. 203237 AND 203738; ACCURIDE ALUMINUM RIMS, P/N 203712; AND GKN STEEL RIMS, P/N 203688, SOLD AS MODIFICATION EQUIPMENT FOR CERTAIN 2005-2007 FORD F-250/F-350 4X4 PICKUP TRUCKS TO MODIFY TRACK WIDTH OF FRONT AND REAR AXLES. THE RIMS PROVIDED IN THESE WHEEL MODIFICATION GROUPS WEAR THROUGH THE OEM BRAKE LINES.
BRAKE FAILURE CAN OCCUR, POSSIBLY RESULTING IN A VEHICLE CRASH.
HARSCO WILL NOTIFY OWNERS AND PROVIDE A REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS FREE OF CHARGE. THE RECALL BEGAN IN SEPTEMBER 2006. OWNERS MAY CONTACT HARSCO AT 507-235-7112.
TIRES:TREAD/BELT
CERTAIN CONTINENTAL CONTITRAC TR OWL, CONTITRAC TR BSW, GENERAL GRABBER TR BSW, AND CONTITRAC BSW TIRES MANUFACTURED BETWEEN MAY 29 AND JUNE 11, 2005, AND SOLD AS ORIGINAL EQUIPMENT ON CERTAIN FORD TRUCKS AND SOLD AS REPLACEMENT TIRES. THESE TIRES CAN WEAR PREMATURELY WHICH FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 119, NEW PNEUMATIC TIRES FOR VEHICLES OTHER THAN PASSENGER CARS.
AFFECTED TIRES MAY NOT MEET THE ENDURANCE TEST REQUIREMENTS OF THE STANDARD. CONTINUED USE OF THE AFFECTED TIRES CAN RESULT IN TIRE FAILURE WHICH COULD LEAD TO VEHICLE DAMAGE OR MOTOR VEHICLE CRASH.
CONTINENTAL WILL NOTIFY OWNERS AND REPLACE THE TIRES FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 7, 2005. OWNERS MAY CONTACT CONTINENTAL AT 704-588-5895.