2007 Ford Explorer
Vehicle Specs & Maintenance Data
The 2007 Ford Explorer maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Ford Explorer.
For oil changes, the 2007 Ford Explorer takes 5W-20 Full Synthetic motor oil with a capacity of 6 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Ford Explorer, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2007 Ford Explorer. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2007 Ford Explorer uses 5W-20 Full Synthetic motor oil (6 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2007 Ford Explorer.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2007 Ford Explorer. Check your VIN at NHTSA.gov
EQUIPMENT
MARATHON IS RECALLING CERTAIN SEAT COVERS, BRAND SUPERHIDES WITH PART NUMBERS 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, AND 630, SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE SEAT COVERS ARE MADE OF HEAVIER THREAD AND ARE NOT COMPATIBLE WITH SEATS CONTAINING SIDE AIRBAGS. THE HEAVIER SEAT COVER COULD INTERFERE WITH FULL DEPLOYMENT OF THE AIRBAG IN THE EVENT OF A CRASH.
AN IMPROPERLY DEPLOYED AIRBAG COULD RESULT IN SERIOUS INJURY.
MARATHON WILL NOTIFY OWNERS OF RECORD AND REPLACE THE SEAT COVER FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 14, 2010. OWNERS MAY CONTACT MARATHON AT 1-800-735-2769.
VISIBILITY:GLASS, SIDE/REAR
CERTAIN CURVED TEMPERED REPLACEMENT GLASS MANUFACTURED BY HANGZHOU SAFETY GLASS LTD AND SUPPLIED TO SAFELITE BY AUTO TEMP INC., IDENTIFIED AS DOT-430, AND SOLD FOR USE ON CERTAIN DOMESTIC AND FOREIGN VEHICLES MAY NOT BREAK INTO SMALL PIECES AS EXPECTED OF TEMPERED GLASS AND FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, "GLAZING MATERIALS."
IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT(S) MAY BE SERIOUSLY INJURED BY SHATTERED GLASS.
SAFELITE WILL NOTIFY ITS RETAIL CUSTOMERS AND REPLACE THE GLASS FREE OF CHARGE. RETAIL CUSTOMERS CAN CONTACT SAFELITE TOLL FREE AT 1-888-843-2906. SAFELITE WILL NOTIFY ITS WHOLESALE CUSTOMERS AND REIMBURSE WHOLESALE CUSTOMERS FOR CURRENT INVENTORY AND AT A SPECIFIED RATE FOR REPLACING THEIR CUSTOMER'S GLASS. WHOLESALE CUSTOMERS CAN CONTACT SAFELITE'S WHOLESALE DIVISION, SERVICE AUTOGLASS TOLL FREE AT 1-888-246-6298. THE RECALL BEGAN ON JANUARY 15, 2008.
STEERING
ON CERTAIN SPORT UTILITY VEHICLES, THE TWO BOLTS THAT ATTACH THE STEERING GEAR ASSEMBLY TO THE FRAME MAY HAVE BEEN OVER-TIGHTENED. THIS CONDITION COULD RESULT IN ONE OR BOTH OF THE BOLTS FRACTURING, CAUSING THE STEERING GEAR TO BECOME LOOSE.
THIS CONDITION COULD CAUSE "CLUNKING" NOISE WHEN STEERING AS WELL AS DECREASED STEERING EFFECTIVENESS POTENTIALLY RESULTING IN A CRASH.
DEALERS WILL REPLACE BOTH THE STEERING GEAR ASSEMBLY MOUNTING BOLTS AND NUTS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 27, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.