2009 Jeep Grand Cherokee
Vehicle Specs & Maintenance Data
The 2009 Jeep Grand Cherokee maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Jeep Grand Cherokee.
For oil changes, the 2009 Jeep Grand Cherokee takes 5W-20 Full Synthetic motor oil with a capacity of 7 quarts. Brake fluid type is DOT 3, the recommended coolant is Mopar OAT (Purple/Violet), and transmission fluid is ATF+4. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Jeep Grand Cherokee, torque the lug nuts to 95 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2009 Jeep Grand Cherokee. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2009 Jeep Grand Cherokee uses 5W-20 Full Synthetic motor oil (7 qt capacity), requires lug nuts torqued to 95 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2009 Jeep Grand Cherokee.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2009 Jeep Grand Cherokee. Check your VIN at NHTSA.gov
POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)
Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2010 Jeep Grand Cherokee vehicles manufactured February 11, 2004, through March 9, 2010; and 2006-2010 Jeep Commander vehicles manufactured January 31, 2005, through March 10, 2010. A transfer case electrical failure may result in an unintentional shifting of the transfer case into the neutral position.
If the vehicle shifts into neutral, it may roll away increasing the risk of a crash or personal injury.
Chrysler will notify owners, and dealers will reflash the final drive controller which governs the transfer case, with new software, free of charge. The recall began on August 15, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N23.
SUSPENSION
ROCK KRAWLER IS RECALLING 44 PERFORMANCE SUSPENSION SYSTEMS SOLD AS AFTERMARKET EQUIPMENT FOR USE ON THE VEHICLE LISTED ABOVE. THESE SUSPENSION SYSTEMS WERE PRODUCED WITH GRADE 2 CARRIAGE BOLTS INSTEAD OF THE PROPER GRADE 5 CARRIAGE BOLTS. THE IMPROPER GRADE 2 CARRIAGE BOLTS COULD EXPERIENCE A LOSS OF CLAMPING FORCE FOR THE BOTTOM STRUT FORK.
THIS CONDITION COULD CAUSE A LOSS OF EFFECTIVE LIFT AND LOWERING OF THE AFFECTED VEHICLE, POSSIBLY CREATING THE DRIVER TO PANIC WHICH COULD POSSIBLY LEAD TO A VEHICLE CRASH.
ROCK KRAWLER WILL NOTIFY OWNERS AND PROVIDE A FREE REMEDY. THE SAFETY RECALL BEGAN ON OCTOBER 15. 2008. ALL THE AFFECTED UNTITS HAVE BEEN REMEDIED. OWNERS MAY CONTACT ROCK KRAWLER AT 1-518-270-9822.
ELECTRICAL SYSTEM:WIRING
CHRYSLER IS RECALLING 4,314 MY 2009 DODGE JOURNEY, JEEP GRAND CHEROKEE, COMMANDER AND WRANGLER VEHICLES. WIRING MAY BE REVERSED ON THE STEERING COLUMN CONTROL MODULE DRIVER AIRBAG SQUIB CONNECTOR. THE DRIVER'S AIRBAG MAY NOT DEPLOY AS INTENDED.
IN THE EVENT OF A CRASH, THE DRIVER'S AIRBAG MAY NOT PROPERLY INFLATE AND MAY NOT BE ABLE TO PROPERLY PROTECT AN OCCUPANT, INCREASING THE RISK OF INJURIES.
DEALERS WILL INSPECT THE DRIVER'S AIRBAG SQUIB WIRES AND REPLACE THE STEERING COLUMN CONTROL MODULE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2009. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.