2011 Buick Regal

Vehicle Specs & Maintenance Data

Engine Size
Engine
2L I4 Turbo
Oil Type & Capacity
5W-30 Full Synthetic (5 qts)
Transmission
Automatic (S6)
Wheel Torque
110
ft-lbs

The 2011 Buick Regal maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Buick Regal.

For oil changes, the 2011 Buick Regal takes 5W-30 Full Synthetic motor oil with a capacity of 5 quarts. Brake fluid type is DOT 3, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Buick Regal, torque the lug nuts to 110 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

Owners of the 2011 Buick Regal have reported 5 common issues including "2.0L Turbo Timing Chain Stretch and Rattle", "Power Brake Booster Failure" and "Water Pump Failure and Coolant Leak". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.

There are 4 NHTSA safety recalls on file for the 2011 Buick Regal. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2011 Buick Regal uses 5W-30 Full Synthetic motor oil (5 qt capacity), requires lug nuts torqued to 110 ft-lbs, takes DOT 3 brake fluid.

2011 Buick Regal Specifications
Motor Oil5W-30 Full Synthetic
Oil Capacity5 qt
Lug Nut Torque110 ft-lbs
Brake FluidDOT 3
CoolantDex-Cool (OAT)
Transmission FluidDexron VI
Transmission Fluid
Fluid Type
Dexron VI
Shop
Coolant
Fluid Type
Dex-Cool (OAT)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop

Manufacturer-recommended maintenance schedule for the 2011 Buick Regal. Always verify intervals against your owner's manual.

Service Item
Interval
Engine Oil & Filter
7,500 mi / 12 mo
Dexos1 5W-30 synthetic, 5 qt (2.0L turbo I4) or 5.5 qt (2.4L)
Tire Rotation
7,500 mi / 6 mo
Rotate every oil change
Cabin Air Filter
22,500 mi / 24 mo
Located behind glove box
Engine Air Filter
45,000 mi / 48 mo
Inspect at 22,500 mi
Brake Fluid
45,000 mi / 36 mo
DOT 3
Transmission Fluid
50,000 mi
6-speed automatic or 6-speed manual; Dexron VI (auto)
Coolant
150,000 mi
Dex-Cool OAT; then every 30,000 mi
Spark Plugs
60,000 mi
Iridium-tipped
Serpentine Belt
75,000 mi
Inspect at 60,000 mi
Battery
60 mo
Inspect annually
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2011 Buick Regal.

Common problems reported by 2011 Buick Regal owners, with recommended fixes and estimated repair costs.

1

2.0L Turbo Timing Chain Stretch and Rattle

The 2.0L LTG turbocharged four-cylinder engine develops timing chain stretch over time, causing a rattle on cold starts and eventually triggering check engine lights with timing correlation codes (P0016, P0017). The chain tensioner and guides wear prematurely, especially if oil change intervals are extended. Advanced stretch can cause rough running and misfires.

Solution

Replace the timing chain, tensioner, and guides as a complete set. The repair requires removal of the front timing cover and is moderately labor-intensive. Use the updated GM tensioner with improved oil passages. Maintain strict oil change intervals with full synthetic 5W-30 oil to prevent recurrence.

Est. Cost: $800 - $1,800
2

Power Brake Booster Failure

The power brake booster loses vacuum assist, causing a hard and high brake pedal that requires significantly more foot pressure to stop the vehicle. Some owners report a hissing noise from the brake booster area and a noticeable increase in stopping distance. The issue can develop gradually or appear suddenly, creating a safety concern.

Solution

Replace the power brake booster and inspect the vacuum supply hose and check valve. Bleed the brake system after installation. If the brake master cylinder shows signs of internal bypass (spongy pedal), replace it at the same time. Inspect brake pads and rotors for uneven wear caused by reduced braking force.

Est. Cost: $400 - $900
3

Water Pump Failure and Coolant Leak

The water pump on the 2.0L turbo engine leaks coolant from the weep hole or gasket surface, leading to low coolant levels and potential overheating. The pump bearing can also fail, creating a grinding noise from the front of the engine. This issue typically presents between 60,000 and 100,000 miles.

Solution

Replace the water pump, gasket, and thermostat. Flush the cooling system and refill with Dex-Cool coolant. Inspect the serpentine belt for coolant contamination and replace if necessary. Some owners upgrade to an aftermarket water pump with a metal impeller for improved durability.

Est. Cost: $400 - $800
4

Front Strut Mount Bearing Noise and Clunking

The front strut mount bearings wear out and produce a creaking, popping, or clunking noise when turning the steering wheel, especially at low speeds in parking lots. The worn bearing allows the strut to bind during turning, causing the steering to feel notchy. The noise is most noticeable in cold weather and worsens over time.

Solution

Replace both front strut mount assemblies. Most technicians recommend replacing the complete strut assembly (strut, spring, mount, and bearing) to avoid the cost of spring compression. Perform a front-end alignment after replacement. Inspect the CV axle boots and tie rod ends at the same time.

Est. Cost: $400 - $900 for both sides
5

Rear Trunk Release and Latch Failure

The trunk release actuator and latch mechanism fail, preventing the trunk from opening via the key fob button, interior release, or exterior trunk button. Owners are left unable to access the trunk unless they fold down the rear seats and climb into the trunk area to manually release the latch. The issue is often caused by a failed actuator motor or corroded wiring connector.

Solution

Replace the trunk latch and release actuator assembly. Inspect the wiring harness routing through the trunk hinge area for chafing or broken wires caused by repeated opening and closing. Apply dielectric grease to the connector to prevent future corrosion. The latch assembly is accessible from inside the trunk.

Est. Cost: $150 - $400

4 NHTSA safety recalls for the 2011 Buick Regal. Check your VIN at NHTSA.gov

1

ELECTRICAL SYSTEM:WIRING

Campaign: 16V517000 Date: 07/07/2016

General Motors LLC (GM) is recalling certain model year 2011 Buick Regal vehicles manufactured November 3, 2009, to March 25, 2011, equipped with 8-way power adjustable front seats. The power seat wiring harness may contact the seat frame, causing the wires to chafe.

Consequence

Chafed harness wires may cause a short circuit, increasing the risk of a fire.

Remedy

GM will notify owners, and dealers will inspect and secure the wiring harness, and repair any chafed wires as necessary, free of charge. The recall began on March 13, 2017. Owners may contact Buick customer service at 1-800-521-7300. GM's number for this recall is 30710.

2

ELECTRICAL SYSTEM:IGNITION

Campaign: 16V502000 Date: 05/07/2016

General Motors LLC (GM) is recalling certain model year 2016-2017 Buick Verano and 2016 Chevrolet Malibu as the electronic park lock lever may allow the ignition key to be removed without the transmission being in PARK. Also, certain 2013 Buick Encore, 2011 Buick Regal, 2013-2014 Buick Verano, 2011-2016 Chevrolet Cruze, 2010-2013 Chevrolet Equinox 2013-2015 Chevrolet Malibu, and 2011-2013 GMC Terrain vehicles may have been serviced with similar defective replacement electronic park lock levers. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection and Rollaway Prevention."

Consequence

If the key is removed without the transmission in PARK, the vehicle may rollaway as occupants are exiting, increasing the risk of injury.

Remedy

GM will notify owners, and dealers will inspect and if necessary replace the key cylinder lock housing, free of charge. The recall began on October 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, Buick 1-800-521-7300, and GMC 1-800-462-8782. GM's number for this recall is 50490 and 50491.

3

SEATS:FRONT ASSEMBLY:POWER ADJUST

Campaign: 14V447000 Date: 23/07/2014

General Motors LLC (GM) is recalling certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position.

Consequence

If the driver's seat unexpectedly drops, the distraction and altered seat position may affect the drivers' control of the vehicle, increasing the risk of a crash.

Remedy

GM will notify owners, and dealers will replace the height adjuster shoulder bolts, free of charge. The manufacturer distributed interim letters to owners on September 11, 2014. The recall began on December 26, 2014. Owners may contact GM customer service at 1-800-521-7300 (Buick), 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14271.

4

EXTERIOR LIGHTING:TURN SIGNAL

Campaign: 12V484000 Date: 04/10/2012

General Motors LLC (GM) is recalling certain model year 2011-2013 Buick Regal and model year 2013 Chevrolet Malibu vehicles. These vehicles are equipped with two turn signal bulbs in each front turn signal. If one of the two front turn signal bulbs burn out in either front turn signal lamp, there is no indication to the driver. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 108, "Lamps, Reflective Devices, and Associated Equipment."

Consequence

If the driver is not aware that a turn signal is not functioning properly, the driver may continue to drive the vehicle. If half of a front turn signal is not illuminating, other driver's may not be aware that the affected vehicle is turning, thereby increasing the risk of a crash.

Remedy

GM will notify owners, dealers will update the body control module software, free of charge. The recall began in September 2014. Owners may contact Buick at 1-800-521-7300 or Chevrolet at 1-800-222-1020. GM's number for this recall is 12212.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Regal — Other Model Years
2020201920182017201620152014201320122004
See Also
2011 Buick Regal Lug Nut TorqueBest Oil for 2011 Buick RegalAll Vehicles Using 5W-30 Full Synthetic OilAll Vehicles Using DOT 3Oil Change Guide: 2011 Buick RegalWiper Replacement: 2011 Buick Regal