2011 Nissan Sentra
Vehicle Specs & Maintenance Data
The 2011 Nissan Sentra maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Sentra.
For oil changes, the 2011 Nissan Sentra takes 0W-20 Full Synthetic motor oil with a capacity of 4.9 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Sentra, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2011 Nissan Sentra. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2011 Nissan Sentra uses 0W-20 Full Synthetic motor oil (4.9 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2011 Nissan Sentra.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2011 Nissan Sentra. Check your VIN at NHTSA.gov
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES EQUIPPED WITH MR20 ENGINES, MANUFACTURED FROM MAY 11, 2010, TO MAY 22, 2010, AND JULY 8, 2010, TO OCTOBER 25, 2010. THE ZINC COATING APPLIED TO THE TERMINAL STUD BOLT WAS THICKER THAN SPECIFICATION. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE (ECM).
THIS ISSUE CAN CAUSE THE ENGINE TO STALL WHILE THE VEHICLE IS IN MOTION AND IT MAY NOT BE POSSIBLE TO RESTART THE ENGINE AFTER IT STOPPED, INCREASING THE RISK OF A CRASH.
NISSAN WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE POSITIVE BATTERY TERMINAL AND COVER, FREE OF CHARGE. THE RECALLBEGAN ON JANUARY 23, 2012. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES, MANUFACTURED FROM MAY 22, 2010, THROUGH JULY 8, 2010. DUE TO A MACHINING IRREGULARITY, THE BOLT/WASHER SURFACE ON THE POSITIVE BATTERY TERMINAL CABLE END MAY ALLOW FOR A GAP TO OCCUR IN THE CONTACT AREA OF THE TERMINAL. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE.
THIS ISSUE CAN CAUSE THE ENGINE TO STOP RUNNING WHILE THE VEHICLE IS IN MOTION AT LOW SPEED WITH A DIFFICULT OR NO START INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE POSITIVE BATTERY TERMINAL CABLE END WITH A NEW ONE FREE OF CHARGE. THE SAFETY RECALL BEGAN PN NOVEMBER 29, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.