2011 Toyota Sequoia

Vehicle Specs & Maintenance Data

Engine Size
Engine
5.7L V8
Oil Type & Capacity
0W-20 Full Synthetic (7.9 qts)
Transmission
Automatic (S6)
Wheel Torque
97
ft-lbs

The 2011 Toyota Sequoia maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Toyota Sequoia.

For oil changes, the 2011 Toyota Sequoia takes 0W-20 Full Synthetic motor oil with a capacity of 7.9 quarts. Brake fluid type is DOT 3, the recommended coolant is Pink Long Life Coolant (OAT), and transmission fluid is ATF WS. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Toyota Sequoia, torque the lug nuts to 97 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There are 7 NHTSA safety recalls on file for the 2011 Toyota Sequoia. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2011 Toyota Sequoia uses 0W-20 Full Synthetic motor oil (7.9 qt capacity), requires lug nuts torqued to 97 ft-lbs, takes DOT 3 brake fluid.

2011 Toyota Sequoia Specifications
Motor Oil0W-20 Full Synthetic
Oil Capacity7.9 qt
Lug Nut Torque97 ft-lbs
Brake FluidDOT 3
CoolantPink Long Life Coolant (OAT)
Transmission FluidATF WS
Transmission Fluid
Fluid Type
ATF WS
Shop
Coolant
Fluid Type
Pink Long Life Coolant (OAT)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2011 Toyota Sequoia.

No known problems reported for this vehicle yet.

7 NHTSA safety recalls for the 2011 Toyota Sequoia. Check your VIN at NHTSA.gov

1

STEERING:HYDRAULIC POWER ASSIST SYSTEM

Campaign: 21E103000 Date: 23/12/2021

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

Consequence

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Remedy

Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.

2

STEERING:HYDRAULIC POWER ASSIST SYSTEM

Campaign: 21V920000 Date: 23/11/2021

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

Consequence

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Remedy

Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.

3

SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER

Campaign: 16V396000 Date: 02/06/2016

Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.

Consequence

If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.

Remedy

SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.

4

VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

Campaign: 15V689000 Date: 22/10/2015

Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Consequence

If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.

Remedy

Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.

5

SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER

Campaign: 14V743000 Date: 19/11/2014

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.

Consequence

Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.

Remedy

SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.

6

AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE

Campaign: 13V014000 Date: 16/01/2013

Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

Consequence

If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.

Remedy

Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.

7

TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

Campaign: 11V148000 Date: 04/03/2011

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 FJ CRUISER, LAND CRUISER, TACOMA, SEQUOIA AND TUNDRA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 138, "TIRE PRESSURE MONITORING SYSTEM (TPMS)." WHEN FACTORY-INSTALLED WHEELS AND TIRES WERE REPLACED WITH TOYOTA AUTHORIZED ACCESSORY WHEELS AND LT TIRES PRIOR TO FIRST SALE, THE TIRE PRESSURE MONITORING SYSTEMS WERE NOT RE-CALIBRATED CORRECTLY AND THEREFORE DO NOT START ILLUMINATING THE LOW TIRE PRESSURE WARNING TELLTALE AT THE REQUIRED MINIMUM ACTIVATION PRESSURE.

Consequence

FAILURE TO WARN OF TIRE DEFLATIONS IS A NON-COMPLIANCE WITH FMVSS 138 AND COULD LEAD TO TIRE FAILURE INCREASING THE RISK OF A CRASH.

Remedy

FOR THE LAND CRUISER, SEQUOIA, TACOMA AND TUNDRA VEHICLES, THE DEALER WILL RE-CALIBRATE THE TIRE PRESSURE MONITORING SYSTEM ON AFFECTED VEHICLES AND INSTALL AN UPDATED TIRE AND LOADING INFORMATION LABEL AT NO CHARGE. FOR THE FJ CRUISER VEHICLES, THE TPMS CANNOT BE RESET SO THE ELECTRONIC CONTROL UNIT (ECU) FOR THE TPMS WILL BE REPLACED. TOYOTA IS CURRENTLY DEVELOPING THE REMEDY ECU. IF AN OWNER IS NOT CERTAIN WHETHER HIS OR HER VEHICLE IS EQUIPPED WITH THESE ACCESSORIES, PLEASE CONTACT ANY TOYOTA DEALER FOR AN INSPECTION AT NO CHARGE. THE SAFETY RECALL BEGAN ON MARCH 31, 2011. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Sequoia — Other Model Years
2026202520242023202220212020201920182017
See Also
2011 Toyota Sequoia Lug Nut TorqueBest Oil for 2011 Toyota SequoiaAll Vehicles Using 0W-20 Full Synthetic OilAll Vehicles Using DOT 3Oil Change Guide: 2011 Toyota SequoiaWiper Replacement: 2011 Toyota Sequoia