2012 Honda Odyssey
Vehicle Specs & Maintenance Data
The 2012 Honda Odyssey maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Honda Odyssey.
For oil changes, the 2012 Honda Odyssey takes 0W-20 Full Synthetic motor oil with a capacity of 4.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Type 2 Coolant (OAT), and transmission fluid is ATF DW-1. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Honda Odyssey, torque the lug nuts to 94 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 5 NHTSA safety recalls on file for the 2012 Honda Odyssey. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2012 Honda Odyssey uses 0W-20 Full Synthetic motor oil (4.5 qt capacity), requires lug nuts torqued to 94 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2012 Honda Odyssey.
No known problems reported for this vehicle yet.
5 NHTSA safety recalls for the 2012 Honda Odyssey. Check your VIN at NHTSA.gov
SEATS:MID/REAR ASSEMBLY
Honda (American Honda Motor Co.) is recalling certain 2011-2017 Honda Odyssey vehicles. The second row outboard seats can slide sideways to one of two positions. If a seat is placed between either of the two positions when attaching the seat to the vehicle floor, the seat will not latch properly to the seat striker, allowing the seat to tip forward unexpectedly during braking.
If the seat tips forward during braking, it can increase the risk of injury.
Honda will notify owners, and dealers will install a bracket to the second row outboard floor strikers, free of charge. The recall began April 2, 2018. Owners may contact American Honda Customer Support & Campaign Center at 1-888-234-2138. Honda's number for this recall is S0G.
SEATS:MID/REAR ASSEMBLY
Honda (American Honda Motor Co.) is recalling certain model year 2011-2016 Odyssey vehicles manufactured August 17, 2010, to October 1, 2015. The affected vehicles have second row outboard seats that have a release lever that allows the seats to move for easier access to the third row of seats. This release lever may remain in the unlocked position allowing the seats to move unexpectedly.
An unlocked second row outboard seat increases the risk of injury to the seat occupant during a crash.
Honda will notify owners, and dealers will install an additional bracket and spring to both second row outboard seats, free of charge. Interim letter has been mailed, and a second notification will be sent . Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is KD5.
POWER TRAIN:AUTOMATIC TRANSMISSION
Honda is recalling certain model year 2012-2013 CR-V, Odyssey, and model year 2013 Acura RDX vehicles. During sub-freezing temperatures, the brake-shift interlock blocking mechanism may become slow and allow the gear selector to be moved from the Park position without pressing the brake pedal. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard 114, "Theft Protection and Rollaway Prevention."
If the gear selector is moved from the park position without pressing the brake pedal it can allow the vehicle to roll away, increasing the risk of a crash.
Honda will notify owners and instruct them to take their vehicle to a Honda or Acura dealer. The dealer will install an updated brake shift interlock blocking mechanism free of charge. The recall began on May 13, 2013. Owners may contact Honda at 1-800-999-1009. Honda's campaign recall numbers are S96, S97, and S98.
AIR BAGS
Honda is recalling certain model year 2009-2013 Pilot and 2011-2013 Odyssey passenger vehicles manufactured from March 13, 2008, through December 21, 2012. One or more rivets that attach the airbag module to the airbag cover may be missing.
The absence of more than one rivet could alter the performance of the driver's airbag during deployment. This could potentially increase the risk of injury during a crash.
Honda will notify owners and instruct them to take their vehicle to a Honda dealer. The dealer will inspect the driver's airbag module and replace it if necessary, free of charge. The recall began on March 14, 2013. Owners may contact Honda at 1-800-999-1009.
SUSPENSION:FRONT
HONDA IS RECALLING CERTAIN MODEL YEAR 2012, ODYSSEY VEHICLES MANUFACTURED FROM OCTOBER 31, 2011, THROUGH NOVEMBER 30, 2011. THE RETENTION NUT FOR THE FRONT RIGHT LOWER SUSPENSION DAMPER BOLT MAY NOT HAVE BEEN TIGHTENED TO THE PROPER TORQUE, POTENTIALLY ALLOWING THE NUT TO LOOSEN.
IF THE NUT LOOSENS, THE FRONT HUB ASSEMBLY WOULD ONLY BE ATTACHED BY ONE BOLT, ALLOWING THE WHEEL ASSEMBLY TO SHIFT TO AN EXTREME INWARD ANGLE, RESULTING IN A LOSS OF STEERING, INCREASING THE RISK OF A CRASH.
HONDA CONTACTED ALL NINE OWNERS BY PHONE ON DECEMBER 19, 2011, AND REPAIRED THE VEHICLES AS NECESSARY FREE OF CHARGE. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.