2012 Nissan Altima
Vehicle Specs & Maintenance Data
The 2012 Nissan Altima maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Altima.
For oil changes, the 2012 Nissan Altima takes 0W-20 Full Synthetic motor oil with a capacity of 4.9 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Altima, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 4 NHTSA safety recalls on file for the 2012 Nissan Altima. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2012 Nissan Altima uses 0W-20 Full Synthetic motor oil (4.9 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2012 Nissan Altima.
No known problems reported for this vehicle yet.
4 NHTSA safety recalls for the 2012 Nissan Altima. Check your VIN at NHTSA.gov
STEERING
Nissan is recalling certain model year 2012-2013 Altima vehicles manufactured from May 10, 2012, through July 26, 2012. These vehicles may have been equipped with transverse link bolts and power steering rack bolts that were not torqued to proper specification.
The affected bolts could become loose and fall out which may lead to a loss of vehicle control, increasing the risk of a vehicle crash.
Nissan will notify owners, and dealers will tighten the bolts to the proper torque specifications. The safety recall is expected to begin during November 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
AIR BAGS:SIDE/WINDOW
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 ALTIMA AND VERSA VEHICLES. THESE VEHICLES MAY BE EQUIPPED WITH SIDE CURTAIN AIR BAGS THAT CONTAIN AN INCORRECT PROPELLANT MIXTURE FOR THE INITIATOR COMPONENT USED, RESULTING IN INSUFFICIENT OUTPUT OF COMPRESSED GAS.
THE SIDE CURTAIN AIR BAGS MAY NOT DEPLOY, INCREASING THE RISK OF INJURY.
NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE ONE OR BOTH SIDE CURTAIN AIR BAG MODULES, AS NECESSARY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 12, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 615-725-1000.
AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 NISSAN ALTIMA VEHICLES MANUFACTURED FROM JUNE 15, 2011, THROUGH JUNE 21, 2011 AND MODEL YEAR 2012 NISSAN NV VEHICLES MANUFACTURED FROM JUNE 23, 2011, THROUGH JUNE 28, 2011 BECAUSE THE AIR BAG CONTROL UNIT (ACU) WAS ASSEMBLED INCORRECTLY.
THE AFFECTED ACU WILL NOT OPERATE AS DESIGNED AND THIS ISSUE MAY CAUSE THE AIR BAGS NOT TO INFLATE IN A CRASH WHEN THEY ARE DESIGNED TO INFLATE. THIS COULD INCREASE THE RISK OF INJURY.
NISSAN WILL REPLACE THE AIR BAG CONTROL UNIT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 22, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
SUSPENSION
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN ALTIMA SEDAN VEHICLES MANUFACTURED FROM APRIL 25, 2011, THROUGH JUNE 10, 2011 AT THE CANTON, MISSISSIPPI PLANT. THE TRANSVERSE LINK BOLT MAY NOT HAVE BEEN TORQUED TO THE PROPER SPECIFICATION. THIS CONDITION COULD CAUSE THE BOLT TO BECOME LOOSE WHILE THE VEHICLE IS BEING DRIVEN, CREATING A RATTLING NOISE AND VIBRATION.
IF THE BOLT COMES OUT COMPLETELY, THE DRIVER MAY EXPERIENCE DIFFICULTY CONTROLLING THE DIRECTION OF THE VEHICLE WHICH COULD RESULT IN A CRASH.
NISSAN WILL REPLACE THE TRANSVERSE LINK BOLTS AND NUTS AND TIGHTEN THEM TO THE PROPER TORQUE SPECIFICATION FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 8, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.