2012 Nissan Pathfinder
Vehicle Specs & Maintenance Data
The 2012 Nissan Pathfinder maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Pathfinder.
For oil changes, the 2012 Nissan Pathfinder takes 5W-30 Full Synthetic motor oil with a capacity of 6.6 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Pathfinder, torque the lug nuts to 98 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2012 Nissan Pathfinder. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2012 Nissan Pathfinder uses 5W-30 Full Synthetic motor oil (6.6 qt capacity), requires lug nuts torqued to 98 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2012 Nissan Pathfinder.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2012 Nissan Pathfinder. Check your VIN at NHTSA.gov
SUSPENSION:FRONT:HUB
Nissan is recalling certain model year 2012 Frontier, Pathfinder, and Xterra two-wheel drive vehicles manufactured from June 19, 2012, through July 12, 2012. These vehicles may have been equipped with front wheel hubs that may not meet the design hardness specifications. A wheel hub that was manufactured below hardness specification may wear prematurely and eventually crack.
If the vehicle is driven in this condition, the wheel hub may break, possibly resulting in a vehicle crash.
Nissan will notify owners, and dealers will replaced the left and right side front wheel hub assemblies free of charge. The safety recall began on October 22, 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
ENGINE AND ENGINE COOLING
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011 INFINITI FX, MODEL YEAR 2012 INFINITI M, MODEL YEAR 2011-2012 NISSAN FRONTIER, MODEL YEAR 2011-2012 NISSAN XTERRA, MODEL YEAR 2011-2012 NISSAN PATHFINDER, AND MODEL YEAR 2012 NISSAN NV VEHICLES. SOME OF THE BOLTS THAT CONNECT THE ENGINE OIL COOLER AND THE ENGINE OIL FILTER TO THE ENGINE IN THESE VEHICLES MAY HAVE BEEN MANUFACTURED TO BELOW SPECIFICATION STRENGTH. AS A RESULT, THE BOLT MAY BREAK AT THE OIL FILTER ATTACHMENT POINT AND CAN CAUSE AN ENGINE OIL LEAK.
IF THERE IS AN ENGINE OIL LEAK, THE ENGINE OIL PRESSURE WOULD DROP AND THE ENGINE COULD SEIZE, INCREASING THE RISK OF A CRASH.
NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE CONNECTOR BOLTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 30, 2012. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.