2012 Suzuki Equator
Vehicle Specs & Maintenance Data
The 2012 Suzuki Equator maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Suzuki Equator.
For oil changes, the 2012 Suzuki Equator takes 5W-30 Full Synthetic motor oil with a capacity of 5.6 quarts. Brake fluid type is DOT 3, the recommended coolant is Super Long Life Coolant (Blue/Green), and transmission fluid is Suzuki ATF 3317. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Suzuki Equator, torque the lug nuts to 98 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2012 Suzuki Equator. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2012 Suzuki Equator uses 5W-30 Full Synthetic motor oil (5.6 qt capacity), requires lug nuts torqued to 98 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2012 Suzuki Equator.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2012 Suzuki Equator. Check your VIN at NHTSA.gov
SUSPENSION:FRONT:HUB
Suzuki is recalling certain model year 2012 Equator two-wheel drive vehicles manufactured from June 19, 2012, through July 12, 2012. These vehicles may have been equipped with front wheel hubs that may not meet the design hardness specifications. A wheel hub that was manufactured below hardness specification may wear prematurely and eventually crack.
If the vehicle is driven with a cracked wheel hub, the wheel hub may break, which would reduce the driver's ability to control the vehicle, possibly resulting in a vehicle crash.
All of the affected vehicles have been quarantined at Suzuki dealers prior to being sold. As such, a recall notification letter will not be issued. Suzuki dealers will replace the left and right side front wheel hub assemblies free of charge. Customers may contact Suzuki at 1-877-697-8985.
ENGINE AND ENGINE COOLING
SUZUKI IS RECALLING CERTAIN MODEL YEAR 2011-2012 EQUATOR PICKUP TRUCKS MANUFACTURED FROM JUNE 16, 2011, THROUGH AUGUST 31, 2011. SOME OF THE BOLTS THAT CONNECT THE ENGINE OIL COOLER AND THE ENGINE OIL FILTER TO THE ENGINE IN THESE VEHICLES MAY HAVE BEEN MANUFACTURED TO BELOW SPECIFICATION STRENGTH. AS A RESULT, THE BOLT MAY BREAK AT THE OIL FILTER ATTACHMENT POINT AND CAN CAUSE AN ENGINE OIL LEAK.
IF THERE IS AN ENGINE OIL LEAK, THE ENGINE OIL PRESSURE WOULD DROP AND THE ENGINE COULD SEIZE, INCREASING THE RISK OF A CRASH.
SUZUKI WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE CONNECTOR BOLTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 11, 2012. OWNERS MAY CONTACT SUZUKI AT 1-714-996-7040.