2013 Audi Q7
Vehicle Specs & Maintenance Data
The 2013 Audi Q7 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Audi Q7.
For oil changes, the 2013 Audi Q7 takes 5W-40 Full Synthetic motor oil with a capacity of 6.9 quarts. Brake fluid type is DOT 4, the recommended coolant is G13 (Purple, phosphate-free), and transmission fluid is VW G 055 025 A2. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Audi Q7, torque the lug nuts to 118 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2013 Audi Q7. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2013 Audi Q7 uses 5W-40 Full Synthetic motor oil (6.9 qt capacity), requires lug nuts torqued to 118 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2013 Audi Q7.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2013 Audi Q7. Check your VIN at NHTSA.gov
EQUIPMENT:OTHER:LABELS
Volkswagen Group of America, Inc. (Audi) is recalling certain 2009-2015 Q7 vehicles. The Gross Axle Weight Rating (GAWR) listed on the certification label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims," and Part 567, "Certification."
An overloaded vehicle can increase the risk of a crash.
Dealers will install an overlay label containing the correct rear GAWR on top of the existing safety certification label, free of charge. Owner notification letters were mailed April 24, 2023. Owners may contact Audi's customer service at 1-800-253-2834. Audi's number for this recall is 50G5.
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2013-2017 Audi Q5 and 2013-2017 Audi Q7 vehicles. These gasoline-powered vehicles have a fuel pump flange that may crack, allowing fuel to leak.
A fuel leak in the presence of an ignition source increases the risk of a fire.
Audi will notify owners, and dealers will replace the fuel pump flange if cracks are present. Flanges that do not have cracks will have a protective film applied. These repairs will be performed free of charge. The recall began July 3, 2017. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 20Z8. Note: This recall is an expansion of recall 16V-660.
ENGINE AND ENGINE COOLING
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2013 Audi Q7 vehicles manufactured June 5, 2012, to November 29, 2012 and equipped with a 3.0L TDI engine. In the affected vehicles, a check valve in the engine may become contaminated with plastic debris and allow engine oil to leak into the brake booster.
If oil leaks into the brake booster, the brake booster diaphragm may rupture causing a loss of power braking assist, and increasing the risk of a crash.
Volkswagen will notify owners, and dealers will replace a vacuum line, free of charge. Dealers will also inspect the brake booster system for oil contamination and, if oil contamination is present, additional components will be replaced, free of charge. The recall began on September 24, 2014. Owners may contact Audi at 1-800-253-2834. Volkswagen's number for this recall is 47L8.