2014 Nissan Versa
Vehicle Specs & Maintenance Data
The 2014 Nissan Versa maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Versa.
For oil changes, the 2014 Nissan Versa takes 0W-20 Full Synthetic motor oil with a capacity of 3.7 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Versa, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2014 Nissan Versa. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2014 Nissan Versa uses 0W-20 Full Synthetic motor oil (3.7 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2014 Nissan Versa.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2014 Nissan Versa. Check your VIN at NHTSA.gov
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015. The affected vehicles have a center console trim panel that may catch the driver's shoe and delay the transition from the accelerator pedal to the brake pedal.
A delay in the application of the brake pedal would lengthen the distance needed to stop the vehicle and increase the risk of a crash.
Nissan will notify owners, and dealers will modify the console trim panel, free of charge. The recall began on September 14, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
ELECTRICAL SYSTEM:IGNITION:SWITCH
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.
If the engine start/stop button gets stuck in the housing, road vibrations may cause the engine to shut off unexpectedly while the vehicle is being driven, increasing the risk of a crash.
Nissan will notify owners, and dealers will modify the start/stop switch housing, free of charge. The recall began on August 4, 2015. Owners may contact Nissan customer service at 1-800-647-7261.