2018 Nissan Rogue Select
Vehicle Specs & Maintenance Data
The 2018 Nissan Rogue Select maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Rogue Select.
For oil changes, the 2018 Nissan Rogue Select takes 5W-30 Full Synthetic motor oil with a capacity of 4.3 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan NS-3. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Rogue Select, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2018 Nissan Rogue Select. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2018 Nissan Rogue Select uses 5W-30 Full Synthetic motor oil (4.3 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2018 Nissan Rogue Select.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2018 Nissan Rogue Select. Check your VIN at NHTSA.gov
ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER
Nissan North America, Inc. (Nissan) is recalling certain 2014-2020 Rogue and 2017-2022 Rogue Sport vehicles equipped with a jackknife style ignition key. The jackknife key may collapse into a folded position while driving.
Driver contact with a key in the collapsed position could inadvertently shut off the vehicle while driving, increasing the risk of a crash. Additionally, if the vehicle shuts off while driving, the air bags may not deploy in a crash as intended, increasing the risk of injury.
Dealers will insert a spacer into the key slot of the jackknife key, free of charge. Interim notification letters notifying owners of the safety risk were mailed March 29, 2023. Owner notification letters are expected to be mailed August 30, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R22C5.
ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
Nissan North America, Inc. (Nissan) is recalling certain 2017-2019 Rogue Hybrid vehicles. Contact with the Electronic Control Module (ECM) bracket may damage the engine harness, causing a blown fuse.
A blown fuse may cause an engine stall, increasing the risk of a crash.
Dealers will install a harness protector cover, free of charge. Owner notification letters were mailed December 16, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R21B6.
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
The lack of an image in the back-up camera display increases the risk of a crash.
Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.