2019 Ford Fusion Sport
Vehicle Specs & Maintenance Data
The 2019 Ford Fusion Sport maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Ford Fusion Sport.
For oil changes, the 2019 Ford Fusion Sport takes 5W-20 Full Synthetic motor oil with a capacity of 5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Ford Fusion Sport, torque the lug nuts to 150 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2019 Ford Fusion Sport. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Ford Fusion Sport uses 5W-20 Full Synthetic motor oil (5 qt capacity), requires lug nuts torqued to 150 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Ford Fusion Sport.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2019 Ford Fusion Sport. Check your VIN at NHTSA.gov
EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
An electrical short circuit can increase the risk of a fire.
Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 3, 2025. Additional letters will be sent once the final remedy is available, anticipated February 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 15, 2025.
BACK OVER PREVENTION:SOFTWARE
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)
Ford Motor Company (Ford) is recalling certain 2019-2020 Fusion PHEV vehicles. The battery energy control module (BECM) may become damaged due to excessive voltage and current flow.
A damaged BECM can result in a loss of drive power or fire, increasing the risk of a crash or injury.
Owners are advised not to charge their vehicles until the remedy is completed. Dealers will replace the battery and update the BECM software for free, or Ford will repurchase the vehicle. If your vehicle is currently operating normally, Ford has authorized dealers to replace the fuse block and a software update as an interim repair before the availability of remedy parts for the final repair. This repair will be free of charge (parts and labor). As an alternative remedy, Ford is offering a vehicle refund. Please see Ford's owner notification letter or contact Ford for full details. Owner notification letters were mailed May 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S33.