2007 Nissan Altima
Vehicle Specs & Maintenance Data
The 2007 Nissan Altima maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Altima.
For oil changes, the 2007 Nissan Altima takes 0W-20 Full Synthetic motor oil with a capacity of 4.9 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Altima, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2007 Nissan Altima. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2007 Nissan Altima uses 0W-20 Full Synthetic motor oil (4.9 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2007 Nissan Altima.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2007 Nissan Altima. Check your VIN at NHTSA.gov
AIR BAGS
NISSAN IS RECALLING 204,361 MY 2007-2008 ALTIMA, ALTIMA HYBRID, 350Z, 350Z ROADSTER, MY 2008 ALTIMA COUPE, ROGUE, MY 2009 MURANO, AND INFINITI MY 2007-2008 G35 SEDAN, MY 2008 G37 COUPE AND EX35 PASSENGER VEHICLES EQUIPPED WITH CONTINENTAL AUTOMOTIVE SYSTEMS' OCCUPANT CLASSIFICATION SYSTEM (OCS) CONTROL UNITS. A VARISTOR IN THE OCS CONTROL UNIT LOCATED IN THE PASSENGER SEAT CUSHION MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION. UNDER CERTAIN CONDITIONS, THIS COULD CAUSE AN INTERRUPTION OF SIGNAL BETWEEN THE OCS AND THE AIR BAG CONTROL UNIT (ACU).
THIS COULD RESULT IN THE PASSENGER AIR BAG BEING SUPPRESSED WHICH COULD FAIL TO PROVIDE ADEQUATE PROTECTION IN THE EVENT OF A CRASH.
DEALERS WILL TEST THE SIGNAL BETWEEN THE OCS AND ACU SYSTEMS USING A SPECIAL TOOL TO CHECK THAT IT IS FUNCTIONING AS DESIGNED. IF NECESSARY, THE SEAT CUSHION (CONTAINING OCS HARDWARE) WILL BE REPLACED WITH A NEW ONE MANUFACTURED TO SPECIFICATION. THE RECALL BEGAN ON NOVEMBER 4, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.
ELECTRICAL SYSTEM:IGNITION:MODULE
ON CERTAIN PASSENGER VEHICLES THAT HAVE HAD THE BODY CONTROL MODULE (BCM) REPLACED DURING SERVICE AT A DEALERSHIP, THE TIRE PRESSURE MONITORING SYSTEM (TPMS) MAY HAVE BEEN INADVERTENTLY DEACTIVATED DUE TO AN ISSUE WITH THE DEALER SERVICE SOFTWARE. IF THE TPMS IS TURNED OFF, IT WOULD NOT ALERT THE DRIVER TO A DECREASE IN THE TIRE PRESSURE AS DESIGNED.
DRIVING ON UNDER-INFLATED TIRES IS UNSAFE AND COULD RESULT IN A CRASH.
DEALERS WILL CHECK THE TPMS FUNCTION AND REACTIVATE IT IF NECESSARY. THE RECALL BEGAN ON JANUARY 18, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
ENGINE AND ENGINE COOLING
ON CERTAIN VEHICLES, IF A SUFFICIENTLY HOT OBJECT ENTERS THE AIR FILTER HOUSING THROUGH THE ENGINE FRESH AIR INTAKE SYSTEM AND CONTACTS THE ENGINE AIR FILTER, THE FLAMMABILITY CHARACTERISTICS OF THE AIR FILTER MATERIAL ARE SUCH THAT THE FILTER MAY IGNITE.
IF THE AIR FILTER MATERIAL IGNITES, A FIRE MAY OCCUR.
DEALERS WILL REPLACE THE AIR FILTER WITH A NEW ONE THAT HAS IMPROVED ANTI-FLAMMABILITY MATERIAL CHARACTERISTICS. THE RECALL BEGAN ON JULY 3, 2007, AND WILL CONTINUE THROUGH OCTOBER 1, 2007. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.