2008 Nissan Quest
Vehicle Specs & Maintenance Data
The 2008 Nissan Quest maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Quest.
For oil changes, the 2008 Nissan Quest takes 5W-30 Full Synthetic motor oil with a capacity of 4.6 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Quest, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2008 Nissan Quest. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2008 Nissan Quest uses 5W-30 Full Synthetic motor oil (4.6 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2008 Nissan Quest.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2008 Nissan Quest. Check your VIN at NHTSA.gov
AIR BAGS:FRONTAL
Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.
A detached emblem can become a projectile during air bag deployment, increasing the risk of injury to vehicle occupants.
Dealers will replace the drivers airbag cover. Owner letters were mailed December 8, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall are PC944, PC945, and PC946.
SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
THE DRIVER WILL EXPERIENCE UNUSUAL AND NOTICEABLE LOOSENESS IN THE PEDAL AND A REDUCTION IN BRAKING FORCE INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT TO SEE IF THE PIVOT PIN HAD BEEN FORMED PROPERLY AND WILL REPLACE THE BRAKE PEDAL ASSEMBLY IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 22, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
SEATS
NISSAN IS RECALLING 1,126 MY 2008 QUEST, TITAN AND ARMADA VEHICLES EQUIPPED WITH MANUAL ADJUSTMENT FRONT SEATS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." THE SEAT TRACK ASSEMBLY MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION.
THIS MAY RESULT IN THE MANUAL SEAT PAWL NOT FULLY ENGAGING INCREASING THE RISK OF PERSONAL INJURIES IN THE EVENT OF A CRASH.
DEALERS WILL INSPECT THE SEAT TRACK ASSEMBLY ON THE DRIVER'S AND FRONT PASSENGER SEATS AND REPLACE THE ENTIRE SEAT ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON MAY 27, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.