2019 Dodge Durango

The 5.7L HEMI V8 in the Durango develops the well-known 'HEMI tick' from worn hydraulic roller lifters, particularly those in the MDS (Multi-Displacement System) cylinders. The ticking noise starts on cold startup and may become constant as wear progresses. Severe cases result in camshaft lobe damage, misfires, and loss of power.

Replace lifters and camshaft with updated parts. TSB 09-002-22 covers HEMI lifter noise diagnostics. Use updated 'AD' suffix lifters with improved bearings. Maintain strict oil change intervals with OEM 0W-20 synthetic. Some owners install MDS delete kits to prevent recurrence.

The ZF 8HP 8-speed automatic transmission exhibits rough shifts at low speeds, hesitation during acceleration, and occasional transmission shudder. Owners report the D-Clutch assembly failing, causing slipping between gears and triggering the Malfunction Indicator Lamp with DTC P0733 (Gear 3 Incorrect Ratio).

Perform a D-Clutch repair per TSB 21-021-22. Reflash the TCM with updated calibration software. Replace the transmission fluid with ZF Lifeguard 8 specification ATF. Valve body replacement for persistent shifting complaints.

Vehicles equipped with the eTorque mild hybrid system experience sudden engine stalling while driving, loss of motive power, and difficulty restarting. The engine may also surge during acceleration. The ESS (Engine Stop-Start) system fails to restart the engine after stopping at traffic lights, leaving the vehicle stranded in intersections.

Update the PCM and eTorque control module software. TSB 14-010-22 addresses eTorque communication faults. Replace the 48V battery if it cannot maintain charge. Check the 12V battery condition, as a weak 12V battery exacerbates eTorque system issues.

Some 2022 Durangos experience fuel pump failures causing stalling while driving and difficulty refueling. Owners report the fuel pump nozzle clicking off prematurely and metal debris found in the fuel system. The fuel pump module may fail, resulting in sputtering, loss of power, and the vehicle stranding the driver.

Replace the fuel pump module assembly. TSB 14-006-22 addresses fuel system diagnostics and fuel fill concerns. Inspect the fuel tank for debris contamination. Replace the fuel filter and clean fuel lines if metal debris is found.

The Uconnect infotainment system becomes unresponsive, freezes, or displays a black screen. Dashboard gauges malfunction, door locks operate erratically, and warning lights illuminate without cause. Some owners report the vehicle's electrical system not properly entering sleep mode, causing parasitic battery drain.

Update Uconnect firmware and BCM software. TSB 08-045-22 covers infotainment diagnostics. Diagnose parasitic draw with ammeter testing. Replace the radio module or BCM if they fail to enter sleep mode properly. Check for TSB updates regularly as Stellantis continues to release fixes.

Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may incorrectly illuminate the brake lights and disable the ABS and electronic stability control (ESC). In addition, the vehicle operator may be able to start and shift out of Park without the brake pedal being applied.

A vehicle that can be started and shifted out of Park without applying the brake pedal can result in a vehicle rollaway. Disabled ABS and ESC systems can reduce vehicle handling and control in certain driving situations. Brake lights that incorrectly illuminate can fail to properly indicate the driver's intention to following traffic. Any of these scenarios can increase the risk of a crash.

Dealers will replace the integrated pressure transducer and update the ABS module software, as necessary free of charge. Owner notification letters were mailed December 16, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 94B. This recall replaces previous recall number 22V-426. Vehicles previously remedied under 22V-426 will need to have the new remedy completed.

Chrysler (FCA US, LLC) is recalling certain 2018-2019 Jeep Grand Cherokee and Dodge Durango vehicles. A malfunction in the antilock-brake system (ABS) module may illuminate the brake lights, and allow the vehicle to start and shift out of Park without the brake pedal being applied.

A vehicle that starts and shifts out of Park without applying the brake pedal can result in vehicle rollaway, increasing the risk of a crash without prior warning and/or injury to others outside of the vehicle.

This recall is replaced by NHTSA recall number 24V838. Vehicles already repaired under this recall will need to have the new remedy completed. The remedy includes updated HCU/ABS module software that prevents the HCU/ABS module from falsely reading pressure in the primary circuit. FCA has decided to do a two-Phase Campaign remedy schedule. Phase 1 began November 17, 2022. Phase 2 begin date has not been determined yet. Interim owner notification letters explaining the safety risk were mailed July 28, 2020. Owner notification letters were mailed on November 29, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is Z48.

Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

The lingering rearview image can distract the driver, increasing the risk of a crash.

Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.

Chrysler (FCA US LLC) is recalling certain 2019 Jeep Grand Cherokee and Dodge Durango vehicles. The front differential may have been assembled with pinion gears that are insufficiently hardened, which can lead to the gear teeth wearing down. If both pinion gears have their teeth sufficiently worn off, torque power can not be transferred from the front wheels to the driveline, resulting in loss of power while driving and loss of the PARK function when stationary.

A sudden loss of power while driving or loss of the transmission PARK function can increase the risk of a crash.

Chrysler will notify owners, and dealers will replace the front differential, free of charge. The recall began May 21, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W22.